Übersicht
The ForLigno product range is manufactured from polypropylene. Thanks to the impact modifier we have developed, we are able to achieve a very specific balance between impact resistance and good flow properties.
We mainly use PEFC-certified wood flour from softwood sourced in Germany as wood flour. Alternatively, FSC-certified beech wood can also be used.
Forligno products
Forligno PPH 20921
Type PPH 20921 is based on polypropylene, is impact-modified, and filled with 20% wood fibers.
Application: Injection molding
| Density [g/cm³] | Tensile strength [MPa] | E-modulus [MPa] | Elongation [%] | Charpy unnotched [KJ/m²] |
|---|---|---|---|---|
| 0,98 | 31 | 1930 | 4,6 | 15 |
Forligno PPH 20921G05
The PPH 20921 G05 type is based on polypropylene, is impact-modified, and filled with 20% wood fibers and 5% glass fibers.
Application: Injection molding
| Density [g/cm³] | Tensile strength [MPa] | E-modulus [MPa] | Elongation [%] | Charpy unnotched [KJ/m²] |
|---|---|---|---|---|
| 1,04 | 36 | 2476 | 4,5 | 17 |
Forligno PPH 30921
Type PPH 30921 is based on polypropylene, is impact-modified, and filled with 30% wood fibers.
Application: Injection molding
| Density [g/cm³] | Tensile strength [MPa] | E-modulus [MPa] | Elongation [%] | Charpy unnotched [KJ/m²] |
|---|---|---|---|---|
| 1,1 | 27 | 2900 | 2,1 | 0 |
Forligno PPH 35051
Type PPH 3551 is based on polypropylene, is impact-modified, and filled with 35% wood fibers.
Application: Injection molding
| Density [g/cm³] | Tensile strength [MPa] | E-modulus [MPa] | Elongation [%] | Charpy unnotched [KJ/m²] |
|---|---|---|---|---|
| 1,1 | 27 | 2900 | 2,1 | 0 |
Other types
The types listed above represent only a small selection. We are happy to tailor the compound precisely to your application.